Plastic bongs are for you to enjoy your smoke without worrying about breakage. Acryl is a durable material that can withstand even the most enthusiastic smoker drops and spills while still looking great!
Not only does it protect against tars causing absurdly ugly stains, but it also protects our lungs from harmful toxins in cigarettes with its water filtration system. Hence, they remain healthy no matter what happens during use or who uses them afterward.
Bong – the word conjures up all kinds of images for most people. Some think of a water pipe, others an old-fashioned cigarette holder with tobacco smoke pouring out.
The bong has come a long way in recent years and can be found as either a traditional smoking device or one used to vaporize different substances such as hash oil, potpourri, incense, oils, and even waxes.
Acrylic bongs are the most popular smoking device available on the market today. They are also relatively inexpensive to own and operate compared to other devices, such as glass or ceramic bongs.
You can find acrylic bongs in various shapes, sizes, and colors, and they are very easy to clean. If you want something that will not break when you drop it, an acrylic bong may be for you!
Smoking pipes were invented thousands of years ago by Native Americans who would take their tobacco leaves and smoke them inside a hollowed-out log. These early water smokers consisted mostly of wood with some metal parts such as rings and connectors.
Later, these wooden pieces started being replaced with more durable metals like iron, steel, brass, copper, and nickel, which helped make smoking pipes easier to use and maintain over time.
In 1881, John Coughlin patented his “Water Pipe,” made from tin with a small mouthpiece attached. This design allowed people to enjoy the benefits of nicotine without inhaling copious amounts of toxic air.
In 1908, William Painter developed a method for making smoked cigarettes called “pork ribbing.” He did this by packing shredded tobacco into a tube he called a “cigarette holder” and lighting up the top end. When the smoker drew on the cigarette holder’s side, fresh air entered the combustion chamber, where the burning charcoal forced hot gases through the tobacco into the lungs.
It wasn’t long after that cigarette became widely accepted throughout society. By 1920, there were approximately 200 million American citizens addicted to cigarettes. Cigarette manufacturers knew that if they could get people hooked on cigarettes, they’d become lifelong customers and loyal consumers.
As cigarettes’ popularity grew, so did the demand for better-quality products. At first, many companies sold their products directly to retailers but soon realized that selling directly would cut profits. As a result, cigarette manufacturing giants like Philip Morris Company (today known as Altadis USA) formed partnerships with local businesses.

For example, the company bought land near factories to produce cheap wrappers for sticks of cigarettes while simultaneously buying raw materials from farmers. And since people always needed places to go during hard economic times, stores opened specifically to stock cigarettes and were built across America. Over time, cigarette sales increased exponentially.
Not surprisingly, manufacturers found themselves running low on space to store all those boxes full of money. Because each box contained only twenty sticks of cigarettes, it took up less room than ten cartons of milk.
After World War II ended, new technologies began emerging, which led to further advancements in the field of smoking devices. People wanted ways to relax that didn’t involve furtively sneaking around like thieves.
So, in 1954, James W. Turner came up with the idea of using percolation to heat dried herbs instead of burning them. Percussion involves placing herbs inside a porous material like sand or crushed bark, along with a fuel source.
Once lit, the peruser heats the substance until the oil burns off, releasing aromatic vapors. Since percussion doesn’t burn the herb completely, users still consume the active ingredients found within rather than waste the leftovers.
The next breakthrough happened in 1973 when Alfredo Ferrer created the world’s first modern water pipe. His creation looked exactly like a water pipe except for two things. First, the hose length connected to the head was about three feet long.
Second, the device itself was shaped like a cone with a conical filter fitted onto the bottom of the piece. Ferrer chose the shape because it produced smoother hits and gave the user greater control over how much-vaporized liquid entered their lungs.
While experimenting with different designs, Ferrer noticed that adding another inch to the height of the water pipe reduced drag and improved performance. He added another foot to the total height and named the product “San Andreas.”
After becoming successful with San Andreas water pipes, Ferrer worked tirelessly to perfect his invention. Eventually, he released a line of high-quality water pipes named Vaporgaard. Today, Vaporgaard remains one of the largest producers of smoking accessories in the United States.
Its success has spawned imitators, copycats, and knockoffs galore. Some of the best-looking ones include water pipes featuring bowls made of stainless steel, porcelain, plastic, glass, and bamboo. There are also several acrylic bongs designed especially for beginners, veterans, and anyone wanting to buy an affordable way to indulge in a little hobby.
So why do people choose acrylic bongs instead of regular water pipes or traditional smoking glasses? Read on to learn what makes acrylic bongs great alternatives to smoking pipes.
What Is An Acrylic Pipe?
An acrylic pipe consists of four main components: the base, stem, slide valve, and carb cap. Unlike other forms of smoking apparatus, including water pipes and ceramic bongs, an acrylic pipe does not require any ignition system.
All that’s needed is a match or lighter. However, unlike cigars, no special care needs to be taken regarding storage. Unlike cigarettes, an individual cannot just throw away their acrylic pipe when finished unless they’re concerned about wasting valuable resources.
Also, because an acrylic pipe contains clear tubing, the user will immediately know whether they’ve been smoking correctly. Finally, cleaning an acrylic pipe is extremely simple. Put a few drops of dish soap in your sink and run plenty of cold water throughout the unit. Then wipe everything down with a damp cloth, allowing it to dry naturally overnight. That’s all there is to it.

A Brief History Of The Acrylic Bong
While several hundred years old, the history of the acrylic bong begins with German craftsman Karl Fuchs. Back in 1790, Mr. Fuchs was commissioned by King Friedrich Wilhelm III to create a gadget capable of delivering pure oxygen into rooms occupied by sickly monarchs.
Using only common household items, Mr. Fuchs built a small generator that sent oxygen directly into the king’s bedroom. Unfortunately, this innovative project failed miserably because the tiny generator couldn’t supply enough power to pump sufficient quantities of oxygen through miles of hose.
It wasn’t until nearly a century later that another man emerged who might be considered the father of the modern acrylic bong. In 1910, Dr. Charles Jackson constructed a prototype for the world’s first transparent water pipe.
The “Vaporizer,” Dr. Jackson’s original model featured a single elongated cylinder topped with a semi-spherical cup at its center. Users placed wicks made of cotton soaked in alcohol underneath the cups’ rims. Once lit, the flame would cause the wicks to catch fire and draw heated air upwards into the cylindrical portion of the Vaporizer.
Upon reaching the uppermost area of the tank, the warm air passed through holes drilled near the edges of the cylinder and exited through holes in the sides of the cup. Before long, several doctors and nurses began purchasing the Vaporizers as gifts for patients.
Their positive feedback encouraged Dr. Jackson to continue producing additional models. Although the Vaporizer’s appearance changed slightly between 1910 and 1922, its basic design remained unchanged.
Next, we’ll discuss the various kinds of acrylic bongs currently available.
Types of Acrylic Bongs To Choose From
There are dozens of styles of acrylic bongs available on the market. Most consist of a large reservoir filled with glowing quartz crystals. Quartz crystal beads act as both an igniter and a heating element.
When exposed to intense flames or heat, these beads release electrons that flow toward grounded electrodes on either side of the quartz container. During transit, the electrical current causes the quartz molecules to vibrate rapidly, creating radiant heat energy that permeates the surrounding atmosphere.
Inside a typical acrylic bong, the quartz tubes are submerged in fluid typically consisting of distilled water, glycerin, or juice. When activated, the process produces thick clouds of highly concentrated vapor similar to ethereal marijuana smoke.
When choosing an acrylic bong, keep in mind that size matters. Generally speaking, larger bongs offer stronger hits. Remember, however, that bigger isn’t necessarily better. Sometimes smaller units pack more punch simply because of the overall amount of surface area present. Additionally, don’t forget to consider safety concerns.
My Favorite Acrylic Bongs
Acryl Bong Alien

– Alien head design
– Assorted colors
– The metal downtube and bowl, mouthpiece ring, rubber grommet, and base are standardized bong parts
– A simple but highly effective bong design.
Height: 30.5cm
Diameter: 38mm
Color: yellow/red, clear, fluorescent/blue
Acryl Bong Double Colored

The Acrylic 2-Chamber Recliner and Bubble Bong is an ingenious smoking device featuring two brightly colored chambers to give it a cooler and extra smooth smoke, as the smoke has further distance to travel from the bowl to the lungs.
Both parts are sturdy with their thick rubber base and are made into one piece by two tubes connecting each shaft to the other. It might be a little bit crazy looking, but it’s a lot of fun, and the double chamber provides fantastic smoke.
Height: 31.5cm
Diameter: 38mm
Acryl Bong Double Colored

The Acrylic Large Double Bubble Bong is a wickedly clever smoking device featuring two separate chambers with a large bubble at the base of each.
One chamber sits atop the other, and they are joined only by two brightly colored tubes, which lead from the lower bubble into the upper bubble.
The double chamber effect helps give the bong a much cooler and smoother smoke, as the inhaled smoke travels further from the bowl to the lungs.
Both parts are well supported, with the lower bubble chamber having a rounded and removable base and the upper bubble slotting neatly into the top of the lower shaft. It might be just a little bit crazy looking, but it’s a lot of fun, and the double-chamber effect provides a fantastic smoke.
Height: 52cm
Diameter: 51mm